CHIAN FENG INDUSTRIAL CO., LTD.

Fundamentals

Installation

Damage Analysis

Troubleshooting

New Technology

Variable Geometry Turbocharging

A more effective, though complex, method of turbocharging uses a turbine stage where the swallowing capacity is automatically varied while the engine is running. Turbine flow can be set to provide sufficient energy to drive the compressor at the desired boost level wherever the engine RPM range is operating.

The advantage of this system over wastegate is that all the exhaust flow is put through the turbine wheel giving increased net turbine power output.

The Holset variable geometry system works by controlling the width of a nozzle guiding the gas flow into the turbine wheel.

Variable Geometry Turbocharging

True Ball-Bearing Turbochargers:

Thanks to our single-cartridge, dual ball-bearing technology, Garrett

turbochargers generate far less frictional drag and are 10 times more durable than traditional journal-bearing turbochargers. While first developed for racing, over 100,000 ball-bearing turbos have been produced for OE applications, and are now available in a range of sizes for the street.

Improved efficiency:

New efficient turbine stages deliver more power to your engine and allow Garrett

turbochargers to spool up faster than ever. Our engineers have eliminated old efficiency killers, including on-center turbine housings, clipped turbine wheels and antiquated aerodynamics with the new GT product line.

Garrett AVNTT

Honeywell's Garrett

Advanced Variable Nozzle Turbo (AVNT

) functions as a variable geometry turbocharger. It features a holistic design that minimizes the number of additional parts. The unique vane designs of the AVNT

provide benchmark efficiency throughout the flow range of the unit. The vanes significantly increase turbine efficiency when compared to conventional vane designs, thereby improving engine performance with peak torque at idle.

Actuation:

Garrett

choose electro-hydraulic for the commercial vehicle AVNT

turbochargers. The electro-hydraulic actuation utilizes the bearing system oil feed as the hydraulic source, integrates the two systems into one housing and achieves true vane position control. The AVNT™ is controlled by the engine management electronics by means of variable current or PWM signal.

CHIAN FENG INDUSTRIAL CO., LTD.  No. 158, Anle E.st., Renwu Township, Kaohsiung, Ceunty, Taiwan, R.O.C.
Kaohsiung    TEL:+886-7-3729322    FAX:+886-7-3734330    E-MAIL:sales@turbocharger.com.tw
Taipei Tel:+886-2-2595-6856  Fax:+886-2-2595-0389    Taichung Tel:+886-4-2285-2727  Fax:+886-4-2285-9896  DESIGN BY EZTRUST